Roof Work Safety – Tips for Preventing Falls
The Problem
Falls from roofs are one of the leading causes of fatalities in construction work. Whether it’s a small residential roof or a large commercial project, the risk is the same. Unsafe practices, unprotected edges, and incorrect use of safety equipment can result in serious injuries or death. Today, we’ll discuss how to work safely on roofs and prevent falls by following best practices and WorkSafe New Zealand guidelines.
Identify the Hazards
Roof work hazards include:
- Unprotected Edges: Working near edges without guardrails or fall protection systems.
- Slippery Surfaces: Wet, icy, or dusty roofs increase the likelihood of slipping.
- Improper Use of Ladders: Accessing the roof using unstable or incorrectly positioned ladders.
- Improper Equipment Use: Using damaged or unsuitable fall protection gear, or failing to inspect it.
Safety Practices and Preventative Measures
Use Proper Fall Protection
- Wear a full-body harness that fits properly and connect it to a certified anchor point.
- Ensure your fall arrest system is rated for your weight and the type of work being done.
- Always inspect fall protection equipment for damage or defects before use.
Guardrails and Warning Lines
- Install guardrails around unprotected edges where practicable, especially where work is conducted 2 metres or more above ground.
- Where guardrails aren’t feasible, use temporary warning lines or designated no-go zones to mark roof edges.
Safe Ladder Use
- Place ladders on firm, level ground and secure them to prevent movement.
- Ladders should extend at least 1 metre above the landing point.
- Regularly inspect ladders for signs of wear or damage.
Keep Roof Surfaces Clear
- Remove debris, tools, and loose materials from walking paths.
- Avoid working on roofs during wet, icy, or excessively windy conditions.
- Use slip-resistant footwear appropriate for roof surfaces.
Team Communication
- Use a spotter when working near roof edges.
- Maintain clear communication with your team and coordinate movements to reduce risks.
Training
- Ensure everyone working on roofs is trained in fall protection systems and understands the risks involved.
Real-Life Case or Scenario
A worker fell 6 metres from a commercial roof while installing flashings. They were not wearing a harness and had no anchor point in place. The fall resulted in serious injuries that could have been prevented with a fall arrest system and a job hazard analysis before starting work.
Employee Responsibilities
- Always wear fall protection gear and inspect it before each use.
- Report any unsafe conditions—such as missing guardrails or damaged ladders—to your supervisor.
- Follow all safety training and only carry out tasks you are trained and competent to do.
Employer Responsibilities
- Provide fall protection systems, such as harnesses, anchors, guardrails, and edge protection.
- Ensure all workers are trained in identifying and controlling roof work hazards.
- Maintain and regularly inspect fall protection equipment.
- Develop and enforce a clear Safe Work Method Statement (SWMS) or task-specific plan for roof work.
Discussion & Questions
- "What fall hazards have you noticed while working on roofs?"
- "Does anyone have questions about using their fall protection gear?"
- "Has anyone witnessed or experienced a near-miss involving a fall? What could have prevented it?"
Allow time for team members to share their experiences or concerns.
Commitment/Action Plan
Let’s commit to always using fall protection when working at height. Starting today, take five minutes before your next roofing task to inspect your harness and anchor points, and review your plan with your team.
Wrap-Up
Roof work is one of the most high-risk activities in construction, but it can be done safely. By following these safety practices and WorkSafe NZ guidelines, we can reduce the risk of injury or death. Thank you for making safety a team effort.
Standards Overview
WorkSafe New Zealand requires:
- Fall protection for all work at height (generally 2 metres or more) under the Health and Safety at Work Act 2015 and the Health and Safety in Employment Regulations 1995.
- Employers must provide appropriate edge protection, fall restraint, or fall arrest systems.
- All workers must be trained in safe working at height practices as per WorkSafe’s Best Practice Guidelines for Working at Height in New Zealand.
Disclaimer
These toolbox talks are provided for informational and educational purposes only and are not a substitute for professional legal, health and safety, or regulatory advice.
The content reflects recognised best practices and general industry standards as at the date of publication. However, it may not be applicable to all workplace environments or specific operational contexts.
It is the responsibility of the Person Conducting a Business or Undertaking (PCBU), as well as officers, workers, and other duty holders under the Health and Safety at Work Act 2015 (HSWA), to ensure compliance with all relevant laws, regulations, and WorkSafe New Zealand guidance.
The authors, presenters, and distributors of this toolbox talk disclaim all liability for any loss, damage, or injury arising from the use or reliance on the information provided. Users should seek advice from a suitably qualified health and safety professional or legal advisor for guidance tailored to their specific circumstances.
Always follow your organisation’s policies, procedures, and safe work practices to manage risks and maintain a safe and healthy workplace.
All Rights Reserved Site App Pro 2025