Pre-Shift Inspection for Cranes and Hoists
The Problem
Overhead cranes and hoists are essential for lifting heavy loads, but if they aren’t inspected before use, minor issues can quickly lead to serious accidents, injuries, or fatalities. A thorough pre-use inspection is the key to identifying faults early and ensuring safe operations. Today, we’ll go step-by-step through the inspection process to help spot hazards and take appropriate action.
Identify the Hazards
- Structural Failures: Cracks, bending, or broken components can cause crane collapse.
- Dropped Loads: Damaged hooks, faulty latches, or worn ropes can cause the load to fall.
- Mechanical Failures: Leaks, brake failures, or faulty controls can result in loss of control.
- Electrical Hazards: Damaged power cables can cause electric shock.
Safety Practices and Preventative Measures
Visual Inspection for Structural Damage
- Check for cracks, loose bolts, and broken components.
- Action: Report any structural damage immediately. Do not use the equipment.
- Inspect Wire Ropes or Chains
- Look for fraying, kinks, rust, or wear.
- Action: Tag out and report excessive wear.
Check for Leaks
- Look around the crane and hoist for any signs of hydraulic or oil leaks.
- Action: Report and repair before operating.
- Inspect Power Leads and Plugs
- Look for exposed wires or damaged insulation.
- Action: Remove faulty equipment from service.
Verify Load Rating Plate
- Ensure it is present, clear, and legible. Never exceed the rated capacity.
- Inspect the Hook
- Look for cracks, distortion, or wear.
- Action: Replace damaged hooks immediately.
Test the Safety Latch
- Make sure it opens and closes securely.
- Action: Faulty latches must be reported and repaired.
- Test Control Buttons and Switches
- All control functions should be tested before starting a lift.
- Action: Report unresponsive controls straight away.
Test Hoist Operation
- Lift slowly to check for abnormal sounds or movement.
- Action: Stop and report any irregularities.
- Test Brakes
- Ensure the brakes engage and hold the load.
- Action: Faulty brakes = no-go.
Test Upper Limit Switch
- Inch the hoist to check that the upper limit switch engages.
- Action: Do not operate if it fails.
Confirm Safety Devices Are Working
- Horns, alarms, or any emergency shutoffs must be tested.
- Action: Report any faults.
Real-Life Case or Scenario
On a recent job, a team skipped the crane inspection. A worn wire rope snapped mid-lift, dropping the load and injuring a worker. This incident would’ve been prevented with a simple inspection that morning. Pre-use checks save lives—don’t skip them.
Employee Responsibilities
- Inspect cranes and hoists thoroughly before every use.
- Tag and report any faults or hazards immediately.
- Never operate defective or unsafe equipment.
Employer Responsibilities
- Ensure cranes and hoists are properly maintained and inspected.
- Provide training on pre-use inspections and lifting safety.
- Promptly repair or replace damaged equipment.
Discussion & Questions
- What’s the most common fault you’ve come across during crane inspections?
- Have you ever had to tag out a crane? What happened next?
- What’s one thing we can improve about our current inspection process?
Encourage the team to share examples and concerns.
Commitment/Action Plan
From today, commit to doing a proper pre-use inspection on every crane or hoist before operation. If you spot anything wrong—no matter how minor—tag it out and report it. Take those extra few minutes to ensure everyone goes home safe.
Wrap-Up
Pre-use inspections are not a tick-box exercise—they are a vital safety step. Every hazard you catch during inspection is one less risk on site. Thanks for staying sharp and keeping safety front of mind.
Standards Overview
Canadian workplace health and safety regulations require that lifting equipment be inspected before use and regularly maintained. Relevant standards include:
- Canadian Standards Association (CSA) standards for cranes, hoists, and winches (e.g., CSA Z150 series).
- Employers and organizations must ensure lifting equipment is safe to operate and workers are trained in its safe use.
Disclaimer
“The information provided in this toolbox talk is intended for informational and educational purposes only. It is not a substitute for professional legal, safety, or regulatory advice. The content reflects general best practices and industry standards but may not be applicable to all workplace environments or jurisdictions.
It is the responsibility of employers, supervisors, and workers to ensure compliance with applicable federal, provincial, and territorial laws, regulations, and standards, including but not limited to those set by the Canadian Centre for Occupational Health and Safety (CCOHS) and relevant provincial occupational health and safety authorities. Site App Pro, its affiliates, agents, or representatives—as well as the authors, presenters, and distributors of this toolbox talk—assume no liability for the use or application of the information provided.
Participants are strongly encouraged to consult appropriate legal, safety, or regulatory professionals regarding specific workplace concerns or questions. Always adhere to your organisation’s policies and procedures for health and safety and hazard management.
All Rights Reserved Site App Pro 2025